Volkswagen — Stage 1 / Stage 2 parameters database
The CHIPOK database holds 751 engines for Volkswagen with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 53 models — from early generations to current platforms. Diesel and petrol lineups.
Models53
Engines751
ECU makersBosch, Temic, Siemens/Continental and Delphi
File turnaround30–60 min
or choose step by step
1
Choose a vehicle type
2
Choose a make
3
Choose a model
4
Generation / years
5
Engine
Volkswagen models in the database (53)
About Volkswagen chip tuning
Engines and platforms:
- Main engines: EA888 gen1/2/3/4, EA189, EA211 evo, EA288 evo, TDI CR 1.6/2.0, TDI 3.0 V6, TSI 1.0/1.2/1.4/1.5/1.8/2.0
- Platforms: MQB, MLB, MEB, MQB-A0
Supported ECUs:
- Manufacturers: Bosch, Temic, Siemens/Continental and Delphi
- Specific Volkswagen units in the database: Bosch ME7.1.1, ME7.5, ME7.5.1, ME7.5.2, ME7.5.20, ME7.8, ME9.1, ME9.5.10, MED9.1, MED9.5.X, MED17.1.1, MED17.1.6, MED17.1.21, MED17.1.27, MED17.5.X, MED17.5.20, MED17.5.21, MED17.5.25, MED17.5.26, MED17.8.10, MED17.9.7, EDC15P/VM, EDC15P+, EDC15VM+, EDC16U1, EDC16U31, EDC16U34, EDC16CP34, EDC17C46, EDC17C49, EDC17C54, EDC17C64, EDC17C74, EDC17C84, EDC17CP04, EDC17CP14, EDC17CP20, EDC17CP24, EDC17CP44, EDC17CP54, EDC17CP74, EDC17CP90, MG1CS001, MG1CS002, MG1CS022, MG1CS024, MG1CS108, MG1CS111, MG1CS181, MG1CS281, Continental SIMOS PCR2.1, SIMOS PCR2.2, SIMOS 6, SIMOS 7.X, SIMOS 8.X, SIMOS 9.1, SIMOS 10.1, SIMOS 11.1, SIMOS 12, SIMOS 16.10, SIMOS 16.11, SIMOS 18.1, SIMOS 18.10, DSG TCU: DQ200, DQ250, DQ381, DQ500, DL501, DL382, MEB battery + drive units (ID.3/ID.4)
- Volkswagen specifics: EDC17/MED17 Bosch family — main fleet, files transfer between sibling VAG models
Available options:
- DTC OFF
- STAGE 1
- EGR OFF
- FLAPS OFF
- VMAX OFF
- STAGE 2
- CAT/LAMBDA OFF
- COLD START OFF
- EVAP OFF
- POP AND BANGS
- NOx OFF
- IMMO OFF
- DPF OFF
- TVA OFF
- ECO TUNING
- LAMBDA OFF
- HARD CUT LIMIT
- OIL PRESSURE OPTIMIZATIONS
- ENGINE TEMPERATURE FIX
- EXHAUST FLAPS ALWAYS OPEN FIX
- OPF/GPF OFF
- ADBLUE OFF
- TORQUE UNLOCK
- EXT FLAPS OFF
- SAP OFF
- EOLYS/ADDITIVE OFF
- START STOP OFF
Service terms:
- Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
- Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
- File returned within 30-60 minutes during working hours
- Free revisions based on an OBD log