ECU Chip Tuning Kefico MEG17.9.13

Kefico MEG17.9.13 — Kefico control unit. Found on Hyundai and Kia — 3 modifications in our database. Available tuning options: Stage 1/2 calibration, disabling EGR recirculation / AdBlue/SCR / CAT/Lambda / the EVAP system, removing the swirl-flap logic, the Pops & Bangs effect, disabling the speed limiter, software fault-code clearing, return to the original firmware, IMMO Off and cold-start deactivation. Reading and writing via KESS3, MPPS V21, PCMflash, BFlash.

3 engines in database 2 brands 13 options

Supported Options

STAGE 2

STAGE 2

Stage 2 — это расширенный программный тюнинг, который раскрывает максимальные возможности штатного железа. Обычно он требует полного удаления экологических систем (DPF, EGR и т.д.)

Learn more about the service
COLD START OFF

COLD START OFF

Cold Start Off — это программное отключение холодного запуска, которое убирает повышенные обороты и громкую работу двигателя при запуске, делая запуск более мягким и комфортным.

Learn more about the service
NOx OFF

NOx OFF

NOx OFF — программное отключение датчика NOx и системы контроля оксидов азота в ЭБУ двигателя.

Learn more about the service
EGR OFF

EGR OFF

EGR Off — это программное отключение системы EGR, которое уменьшает нагар во впуске, улучшает работу двигателя и устраняет связанные с системой ошибки.

Learn more about the service
STAGE 1

STAGE 1

Stage 1 — это программный тюнинг двигателя без установки механических деталей. Он улучшает работу двигателя, повышает мощность и крутящий момент, сохраняя надежность и безопасность.

Learn more about the service
FLAPS OFF

FLAPS OFF

Flaps Off — это программное отключение впускных заслонок, которое предотвращает их заклинивание, улучшает надежность двигателя и устраняет связанные с ними ошибки.

Learn more about the service
VMAX OFF

VMAX OFF

VMAX Off — это программное отключение ограничителя максимальной скорости, позволяющее автомобилю развивать скорость без заводских ограничений.

Learn more about the service
DTC OFF

DTC OFF

DTC Off — это программное отключение кодов ошибок, при котором выбранные ошибки больше не отображаются и не вызывают аварийный режим.

Learn more about the service
POP AND BANGS

POP AND BANGS

Pop and Bangs — это программная функция, создающая хлопки и треск в выхлопной системе при сбросе газа, делая звук автомобиля более спортивным.

Learn more about the service
IMMO OFF

IMMO OFF

IMMO Off — это программное отключение иммобилайзера, позволяющее запускать двигатель без проверки штатной системы защиты.

Learn more about the service
EVAP OFF

EVAP OFF

EVAP Off — это программное отключение системы улавливания паров топлива, которое устраняет ошибки и проблемы, связанные с работой этой системы.

Learn more about the service
CAT/LAMBDA OFF

CAT/LAMBDA OFF

CAT/Lambda Off — это программное отключение катализатора и лямбда-зондов, которое устраняет ошибки, предупреждения и ограничения, связанные с системой выхлопа.

Learn more about the service
RESET TO STOCK

RESET TO STOCK

Reset to Stock — это возврат программного обеспечения блока управления двигателем в оригинальное заводское состояние.

Learn more about the service

Brands with ECU Kefico MEG17.9.13

Frequently asked questions

Which vehicles use the Kefico MEG17.9.13 ECU?

The Kefico MEG17.9.13 is used across 2 brands: Hyundai (2), Kia (1). 3 engines in total in the database.

Which modifications are available for the Kefico MEG17.9.13?

On the Kefico MEG17.9.13 the following are available: STAGE 2, COLD START OFF, NOx OFF, EGR OFF, STAGE 1, FLAPS OFF, VMAX OFF, DTC OFF, POP AND BANGS, IMMO OFF. All options combine in the calculator with the package Max Price cap.

What tool is used to flash the Kefico MEG17.9.13?

To flash the Kefico MEG17.9.13 the following is used: KESS3, Autotuner, MPPS, KTAG, CMD Flash, Trasdata, MagicMotorSport. CHIPOK accepts .bin/.hex/.ori from any of the listed programmers.

What does Stage 1 give on the Kefico MEG17.9.13 ECU?

Stage 1 on the petrol Kefico MEG17.9.13 reprograms ignition timing, lambda target, boost target and wastegate duty (on turbo), throttle response, VANOS/VVT phase, torque limiter.

What Kefico MEG17.9.13 file format is needed for flashing?

Kefico MEG17.9.13 calibration requires a full read of the unit — bin/hex/ori. Programmers: KESS3, Autotuner, MPPS, KTAG. Checksums — on the engineer's side.

Kefico MEG17.9.13 file turnaround time at CHIPOK?

Reading and writing over OBD take 25-30 minutes. Bench reading requires opening the unit — about 60 minutes. Remote processing of a Kefico MEG17.9.13 file at CHIPOK — 5-30 minutes.

How much does flashing the Kefico MEG17.9.13 ECU cost?

The price of Kefico MEG17.9.13 calibration depends on the selected options: Stage 1/2, DPF/EGR/AdBlue off, DTC off. The Max Price cap limits the package total. Paid with CHIPOK credits (1 cr = 1 €).