Bosch MEVD17.2 calibration — Bosch petrol ECU on a Tricore core — TFSI/TSI/MED, direct injection. Supported: Stage 1/2 — power tuning, software removal of EGR, AdBlue, catalyst control, EVAP, disabling the intake flaps, Pops and Bangs, speed limit removal, DTC removal, return to stock, engine temperature fix and Cold Start Off on 22 modifications only on BMW. Reading via KESS3 / KTAG / Autotuner / MagicMotorSport.
The Bosch MEVD17.2 unit is found on 22 different engines. Main brands: BMW (22).
The Bosch MEVD17.2 ECU supports: STAGE 2, COLD START OFF, NOx OFF, EGR OFF, STAGE 1, FLAPS OFF, DTC OFF, VMAX OFF, POP AND BANGS, EVAP OFF. Checksums are recalculated on the engineer's side in WinOLS5.
The Bosch MEVD17.2 is supported by: KESS3, Autotuner, MPPS, KTAG, CMD Flash, Trasdata, MagicMotorSport. On production models OBD reading is usually enough; on locked variants — Bench (BDM/JTAG).
Stage 1 on the petrol Bosch MEVD17.2 reprograms ignition timing, lambda target, boost target and wastegate duty (on turbo), throttle response, VANOS/VVT phase, torque limiter.
The original bin/hex/ori is accepted after reading via KESS3 / Autotuner / CMD Flash / FGTech Galletto. Checksums are recalculated on the engineer's side.
OBD flashing of the Bosch MEVD17.2 — 25-30 minutes, Bench (if needed) — about an hour. The file processing itself takes 5-30 minutes after receipt.
The cost of a Bosch MEVD17.2 file is built in the calculator: you pick the operations you need (Stage 1, emissions removals, service operations) and the price is calculated with the package discount applied.