ECU Chip Tuning Bosch MED9.5.10

Bosch MED9.5.10 ECU chip tuning: Bosch control unit. In the CHIPOK database this unit is found on Volkswagen, Audi, Seat and 1 more brands (22 modifications). Supported: Stage 1/2 Project-Id-Version: ECUTools Online 1.0 Report-Msgid-Bugs-To: POT-Creation-Date: 2026-07-01 14:20+0300 PO-Revision-Date: 2025-01-02 12:00+0000 Last-Translator: Language: en Language-Team: English Plural-Forms: nplurals=2; plural=(n != 1); MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Generated-By: Babel 2.18.0, removal of the EGR valve · SCR/AdBlue · the lambda sensors · SAP · the EVAP system, swirl-flap removal, Pops & Bangs, VMAX Off, DTC clearing, Reset to Stock and cold-start deactivation. Programmers: KESS3, KTAG, FoxFlash, BitBox, BDM100.

22 engines in database 4 brands 13 options

Supported Options

SAP OFF

SAP OFF

SAP Off — это программное отключение системы вторичной подачи воздуха (Secondary Air Pump), которое устраняет ошибки и повышает надежность работы двигателя.

Learn more about the service
STAGE 2

STAGE 2

Stage 2 — это расширенный программный тюнинг, который раскрывает максимальные возможности штатного железа. Обычно он требует полного удаления экологических систем (DPF, EGR и т.д.)

Learn more about the service
COLD START OFF

COLD START OFF

Cold Start Off — это программное отключение холодного запуска, которое убирает повышенные обороты и громкую работу двигателя при запуске, делая запуск более мягким и комфортным.

Learn more about the service
NOx OFF

NOx OFF

NOx OFF — программное отключение датчика NOx и системы контроля оксидов азота в ЭБУ двигателя.

Learn more about the service
EGR OFF

EGR OFF

EGR Off — это программное отключение системы EGR, которое уменьшает нагар во впуске, улучшает работу двигателя и устраняет связанные с системой ошибки.

Learn more about the service
FLAPS OFF

FLAPS OFF

Flaps Off — это программное отключение впускных заслонок, которое предотвращает их заклинивание, улучшает надежность двигателя и устраняет связанные с ними ошибки.

Learn more about the service
STAGE 1

STAGE 1

Stage 1 — это программный тюнинг двигателя без установки механических деталей. Он улучшает работу двигателя, повышает мощность и крутящий момент, сохраняя надежность и безопасность.

Learn more about the service
DTC OFF

DTC OFF

DTC Off — это программное отключение кодов ошибок, при котором выбранные ошибки больше не отображаются и не вызывают аварийный режим.

Learn more about the service
VMAX OFF

VMAX OFF

VMAX Off — это программное отключение ограничителя максимальной скорости, позволяющее автомобилю развивать скорость без заводских ограничений.

Learn more about the service
POP AND BANGS

POP AND BANGS

Pop and Bangs — это программная функция, создающая хлопки и треск в выхлопной системе при сбросе газа, делая звук автомобиля более спортивным.

Learn more about the service
EVAP OFF

EVAP OFF

EVAP Off — это программное отключение системы улавливания паров топлива, которое устраняет ошибки и проблемы, связанные с работой этой системы.

Learn more about the service
CAT/LAMBDA OFF

CAT/LAMBDA OFF

CAT/Lambda Off — это программное отключение катализатора и лямбда-зондов, которое устраняет ошибки, предупреждения и ограничения, связанные с системой выхлопа.

Learn more about the service
RESET TO STOCK

RESET TO STOCK

Reset to Stock — это возврат программного обеспечения блока управления двигателем в оригинальное заводское состояние.

Learn more about the service

Brands with ECU Bosch MED9.5.10

Frequently asked questions

Where is the Bosch MED9.5.10 ECU used?

The Bosch MED9.5.10 ECU is fitted to 22 engines in the CHIPOK database across 4 brands. Top: Volkswagen (11), Audi (4), Seat (4), Skoda (3).

What can be flashed on the Bosch MED9.5.10 unit?

On the Bosch MED9.5.10 the following are available: SAP OFF, STAGE 2, COLD START OFF, NOx OFF, EGR OFF, FLAPS OFF, STAGE 1, DTC OFF, VMAX OFF, POP AND BANGS. All options combine in the calculator with the package Max Price cap.

Which programmers read the Bosch MED9.5.10 ECU?

To flash the Bosch MED9.5.10 the following is used: KESS3, Autotuner, MPPS, KTAG, CMD Flash, Trasdata, MagicMotorSport. CHIPOK accepts .bin/.hex/.ori from any of the listed programmers.

What changes in the Bosch MED9.5.10 with Stage 1?

Stage 1 on the petrol Bosch MED9.5.10 reprograms ignition timing, lambda target, boost target and wastegate duty (on turbo), throttle response, VANOS/VVT phase, torque limiter.

In what format is a Bosch MED9.5.10 file accepted at CHIPOK?

A Bosch MED9.5.10 file is accepted in .bin/.hex/.ori format (full read) from any programmer: KESS3, Autotuner, FoxFlash, KT200. Checksums are recalculated by hand in WinOLS5.

How quickly is a Bosch MED9.5.10 file processed?

Flashing the Bosch MED9.5.10 takes 25-30 minutes in OBD mode or ~60 minutes on Bench. Once the file is received, CHIPOK processes it in 5-30 minutes.

How much does a file for the Bosch MED9.5.10 cost?

The cost of flashing the Bosch MED9.5.10 is calculated in the price calculator: you select options (Stage 1/2, DPF off, EGR off, AdBlue off, DTC off, etc.) and the final price is capped by the package Max Price. Paid with credits (1 cr = 1 €), no subscriptions.