Iveco — Stage 1 / Stage 2 parameters database

The CHIPOK database holds 93 engines for Iveco with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 10 models — from early generations to current platforms. Diesel engines only.

Choose a model
Models10
Engines93
ECU makersBosch and ZF
File turnaround30–60 min
or choose step by step
1
Choose a vehicle type

Iveco models in the database (10)

Iveco Daily
Iveco Daily
27 engines avg. +36 hp
→
2.3 HPI 106 hp·2.3 HPI 116 hp·2.3 HPI 126 hp·2.3 HPI 96 hp·2.3 HPT 136 hp·2.3 JTDm 145 hp more 21
Iveco Trakker
16 engines avg. +57 hp
→
Cursor13 - 410 12.9 410hp (301kW) 2100Nm·Cursor13 - 450 12.9 450hp (331kW) 2200Nm·Cursor13 - 500 12.9 500hp (368kW) 2300Nm·Cursor8 - 310 7.8 310hp (228kW) 1300Nm·Cursor8 - 310 7.8 330hp (243kW) 1400Nm·Cursor8 - 310 7.8 360hp (265kW) 1500Nm more 10
Iveco EuroCargo
13 engines avg. +32 hp
→
E13/3.9L 130hp (96kW) 430Nm·E14/3.9L 140hp (103kW) 460Nm·E15/3.9L 150hp (110kW) 490Nm·E16/3.9L 160hp (118kW) 530Nm·E17/3.9L 170hp (125kW) 560Nm·E18/5.9L 182hp (134kW) 570Nm more 7
Iveco Cursor
11 engines avg. +62 hp
→
Cursor10 - 400 400hp (294kW) 1900Nm·Cursor10 - 430 430hp (316kW) 2100Nm·Cursor13 - 380 12.9 380hp (279kW) 1800Nm·Cursor13 - 440 12.9 440hp (324kW) 2100Nm·Cursor13 - 480 12.9 480hp (353kW) 2200Nm·Cursor13 - 540 12.9 540hp (397kW) 2350Nm more 5
Iveco EuroTrakker
11 engines avg. +49 hp
→
E24/5.9L 245hp (180kW) 1095Nm·E27/5.9L 273hp (201kW) 950Nm·E30/5.9L 299hp (220kW) 1050Nm·E31/5.9L 310hp (228kW) 1115Nm·E34/5.9L 345hp (254kW) 1200Nm·E35 350hp (257kW) 1280Nm more 5
Iveco EuroTech
9 engines avg. +50 hp
→
E24/5.9L 240hp (176kW) 810Nm·E27/5.9L 273hp (201kW) 950Nm·E30/5.9L 299hp (220kW) 1050Nm·E31/5.9L 310hp (228kW) 1115Nm·E35 350hp (257kW) 1280Nm·E38 375hp (276kW) 1540Nm more 3
Iveco Eurocargo
2 engines
→
6.7 252 252 hp·6.7 280 280 hp
Iveco Massif
Iveco Massif
2 engines avg. +34 hp
→
3.0 HPI 146 hp·3.0 HPT 166 hp
Iveco Concorde
1 engine avg. +32 hp
→
3.0 HPT 176hp (129kW) 400Nm
Iveco EuroStar
1 engine avg. +50 hp
→
E38 375hp (276kW) 1540Nm

About Iveco chip tuning

Engines and platforms:
  • Main engines: F1A 2.3/3.0 (Daily), F1C 3.0 (Daily), Cursor 8/9/11/13 (Stralis/S-Way), NEF F4D/F4H/F5 (Eurocargo), Vector 8 (gas)
  • Platforms: Daily, Stralis, S-Way, Eurocargo, Trakker
Supported ECUs:
  • Manufacturers: Bosch and ZF
  • Specific Iveco units in the database: Bosch EDC15C7, EDC16C39, EDC17C49, EDC17C69, EDC17CP52, EDC7UC31, EDC7C32, EDC17CV41 (Cursor 9/13), Magneti Marelli MJD6F3, MJD7C.X, MJD8F.X (NEF F4/F5 / Daily), Delphi DCM3.7, FPT-specific Heuristic ECU, Iveco MR (motor regelung)
  • Iveco specifics: Bosch EDC17C49 / Cursor ECUs — on Daily 3.0 HPI DPF Euro 5 disable
Available options:
Service terms:
  • Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
  • Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
  • File returned within 30-60 minutes during working hours
  • Free revisions based on an OBD log