MAN — Stage 1 / Stage 2 parameters database

The CHIPOK database holds 46 engines for MAN with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 5 models — from early generations to current platforms. Diesel engines only.

Choose a model

Models5

Engines46

ECU makersBosch / Continental / Denso / Siemens

File turnaround30–60 min

or choose step by step

Choose a vehicle type

MAN models in the database (5)

MAN TGX

16 engines avg. +74 hp

→

D2066 10.5 (EU6) 360hp (265kW) 1800Nm·D2066 10.5 (EU6) 400hp (294kW) 1900Nm·D2676 12.4 (EU6) 440hp (324kW) 2100Nm·D2676 12.4 (EU6) 480hp (353kW) 2300Nm·D3876 15.3 (EU6) 540hp (397kW) 2700Nm·D3876 15.3 (EU6) 560hp (412kW) 2700Nm more 10

MAN TGS

12 engines avg. +73 hp

→

D2066 10.5 (EU6) 320hp (235kW) 1600Nm·D2066 10.5 (EU6) 360hp (265kW) 1800Nm·D2066 10.5 (EU6) 400hp (294kW) 1900Nm·D2676 12.4 (EU6) 440hp (324kW) 2100Nm·D2676 12.4 (EU6) 480hp (353kW) 2300Nm·TGS 320 320hp (235kW) 1600Nm more 6

MAN TGA

11 engines avg. +66 hp

→

TGA 320 320hp (235kW) 1900Nm·TGA 350 350hp (257kW) 1800Nm·TGA 360 360hp (265kW) 1750Nm·TGA 390 390hp (287kW) 1900Nm·TGA 400 400hp (294kW) 1900Nm·TGA 410 410hp (301kW) 1850Nm more 5

MAN TGL

4 engines avg. +29 hp

→

TGL 150 150hp (110kW) 570Nm·TGL 180 180hp (132kW) 700Nm·TGL 206 206hp (151kW) 830Nm·TGL 240 240hp (176kW) 925Nm

MAN TGM

3 engines avg. +42 hp

→

TGM 240 240hp (176kW) 925Nm·TGM 280 280hp (206kW) 1100Nm·TGM 326 326hp (240kW) 1250Nm

About MAN chip tuning

Engines and platforms:

Main engines: D08 (TGL/TGM), D20 D2066 (TGS/TGX), D26 D2676 (TGS/TGX), D28 D2868 (TGX 26.640), D38 (heavy), D29 (newer Euro 6e)
Platforms: TGS, TGX, TGL, TGM, TGE (van)

Supported ECUs:

Manufacturers: Bosch / Continental / Denso / Siemens
Specific MAN units in the database: Bosch EDC7C2, EDC7C3, EDC7C32, EDC7UC31, EDC7UC32, EDC17CP02, EDC17CP14, EDC17CP44, EDC17CP54, EDC17C45, MAN MS5.X, MS6.1, MS6.2, MS6.3, MS6.4 (D26 EDC17), MD1CP002, MD1CP021 (Euro 6e), Continental MS6.4 (PCM-D26), ZF AS-Tronic / TipMatic TCU, ZF EcoLife (city buses)
MAN specifics: Continental Cummins / Bosch EDC17 on trucks — AdBlue/SCR/DPF Euro 5/6 disable

Available options:

Service terms:

Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
File returned within 30-60 minutes during working hours
Free revisions based on an OBD log