ECU Chip Tuning Delco E46

On the Delco E46 unit, CHIPOK performs Stage 1 Project-Id-Version: ECUTools Online 1.0 Report-Msgid-Bugs-To: POT-Creation-Date: 2026-07-01 14:20+0300 PO-Revision-Date: 2025-01-02 12:00+0000 Last-Translator: Language: en Language-Team: English Plural-Forms: nplurals=2; plural=(n != 1); MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Generated-By: Babel 2.18.0, removal of the EGR valve, the lambda sensors, the EVAP system, swirl-flap removal, Pops and Bangs, VMAX Off, DTC clearing, Reset to Stock and cold-start deactivation. Delco control unit. 12 modifications on Chevrolet, GMC and Cadillac. Programmers: KESS3, Autotuner, FoxFlash, KT200.

12 engines in database 3 brands 11 options

Supported Options

CHECK STOCK OR NOT

CHECK STOCK OR NOT

CHECK STOCK OR NOT — проверка файла на наличие заводской (оригинальной) прошивки или внесённых изменений.

Learn more about the service
STAGE 1

STAGE 1

Stage 1 — это программный тюнинг двигателя без установки механических деталей. Он улучшает работу двигателя, повышает мощность и крутящий момент, сохраняя надежность и безопасность.

Learn more about the service
DTC OFF

DTC OFF

DTC Off — это программное отключение кодов ошибок, при котором выбранные ошибки больше не отображаются и не вызывают аварийный режим.

Learn more about the service
VMAX OFF

VMAX OFF

VMAX Off — это программное отключение ограничителя максимальной скорости, позволяющее автомобилю развивать скорость без заводских ограничений.

Learn more about the service
EVAP OFF

EVAP OFF

EVAP Off — это программное отключение системы улавливания паров топлива, которое устраняет ошибки и проблемы, связанные с работой этой системы.

Learn more about the service
COLD START OFF

COLD START OFF

Cold Start Off — это программное отключение холодного запуска, которое убирает повышенные обороты и громкую работу двигателя при запуске, делая запуск более мягким и комфортным.

Learn more about the service
FLAPS OFF

FLAPS OFF

Flaps Off — это программное отключение впускных заслонок, которое предотвращает их заклинивание, улучшает надежность двигателя и устраняет связанные с ними ошибки.

Learn more about the service
POP AND BANGS

POP AND BANGS

Pop and Bangs — это программная функция, создающая хлопки и треск в выхлопной системе при сбросе газа, делая звук автомобиля более спортивным.

Learn more about the service
CAT/LAMBDA OFF

CAT/LAMBDA OFF

CAT/Lambda Off — это программное отключение катализатора и лямбда-зондов, которое устраняет ошибки, предупреждения и ограничения, связанные с системой выхлопа.

Learn more about the service
EGR OFF

EGR OFF

EGR Off — это программное отключение системы EGR, которое уменьшает нагар во впуске, улучшает работу двигателя и устраняет связанные с системой ошибки.

Learn more about the service
RESET TO STOCK

RESET TO STOCK

Reset to Stock — это возврат программного обеспечения блока управления двигателем в оригинальное заводское состояние.

Learn more about the service

Brands with ECU Delco E46

Frequently asked questions

Which cars use the Delco E46 unit?

The Delco E46 unit is found on 12 different engines. Main brands: Chevrolet (5), GMC (5), Cadillac (2).

Which options does the Delco E46 ECU support?

On the Delco E46 the following are available: CHECK STOCK OR NOT, STAGE 1, DTC OFF, VMAX OFF, EVAP OFF, COLD START OFF, FLAPS OFF, POP AND BANGS, CAT/LAMBDA OFF, EGR OFF. All options combine in the calculator with the package Max Price cap.

Which programmer is needed for the Delco E46?

To flash the Delco E46 the following is used: KESS3, Autotuner, MPPS, KTAG, CMD Flash, Trasdata, MagicMotorSport. CHIPOK accepts .bin/.hex/.ori from any of the listed programmers.

What is the effect of Stage 1 on the Delco E46 unit?

Stage 1 on the diesel Delco E46 reprograms rail pressure target, SOI/EOI timing, boost target, smoke limiter and torque limiter. The torque gain is noticeable; the HP gain depends on the specific engine.

What should you send to CHIPOK for Delco E46 calibration?

The original bin/hex/ori is accepted after reading via KESS3, KTAG, FoxFlash, BitBox, BDM100. Checksums are recalculated on the engineer's side.

How long does flashing the Delco E46 ECU take?

OBD flashing of the Delco E46 — 25-30 minutes, Bench (if needed) — about an hour. The file processing itself takes 5-30 minutes after receipt.

What is the price of Delco E46 calibration?

The cost of a Delco E46 file is built in the calculator: you pick the operations you need (Stage 1, emissions removals, service operations) and the price is calculated with the package discount applied.