Valtra S Series 240 246hp (181kW) 970Nm — Stage 1 file (+62 hp)
hp
Stage 1 file for Valtra S Series 240 246hp (181kW) 970Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra S Series 240 246hp (181kW) 970Nm ECU
Valtra S Series (I) 240 246hp (181kW) 970Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 246 to 308 hp (+62 hp, +25%) and torque from 970 to 1162 Nm (+192 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Valtra — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Valtra S Series 240 246hp (181kW) 970Nm reach after a remap?
The Stage 1 gain for the Valtra S Series 240 246hp (181kW) 970Nm is 62 hp (+25%) over the stock 246 hp, for a total of 308 hp. Torque rises from 970 to 1162 Nm (+192 Nm).
What is Stage 1 chip tuning for the Valtra S Series?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra S Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +62 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Valtra S Series?
The high-output Valtra S Series 240 246hp (181kW) 970Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Valtra S Series 240 246hp (181kW) 970Nm?
Stage 2 on the Valtra S Series 240 246hp (181kW) 970Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Valtra S Series remain valid after Stage 1?
After remapping the Valtra S Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra S Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra S Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra S Series?
Before Stage 1 the original of the Valtra S Series 240 246hp (181kW) 970Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra S Series 240 246hp (181kW) 970Nm cost?
The remap price for the Valtra S Series 240 246hp (181kW) 970Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.