Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm — Stage 1 file (+54 hp)
hp
Stage 1 file for Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm ECU
Valtra S Series (I) 262 8.4L R6 362hp (266kW) 1295Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 362 to 416 hp (+54 hp, +15%) and torque from 1295 to 1585 Nm (+290 Nm).
Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Valtra — мощностной потолок агросегмента.
Frequently asked questions
What power gain do you get after chip tuning the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm?
The Stage 1 gain for the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm is 54 hp (+15%) over the stock 362 hp, for a total of 416 hp. Torque rises from 1295 to 1585 Nm (+290 Nm).
What is Stage 1 chip tuning for the Valtra S Series?
Stage 1 chip tuning of the Valtra S Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +54 hp with no hardware changes.
What is the Stage 1 potential of the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm?
Stage 1 for the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Valtra S Series?
Stage 2 on the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Valtra S Series warranty after chip tuning?
The factory warranty of the Valtra S Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Valtra S Series take?
On the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Valtra S Series?
Yes, the original ECU firmware of the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Valtra S Series?
Stage 1 for the Valtra S Series 262 8.4L R6 362hp (266kW) 1295Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.