Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm — Stage 1 file (+55 hp)
hp
Stage 1 file for Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm ECU
Mack Trucks MP7 (I (2005+)) MP7-405M (US04) 10.8 411hp (302kW) 2005Nm — commercial diesel engine of the commercial segment of the Volvo Group (Mack Trucks) group (США, 1900). Stage 1 chip tuning raises power from 411 to 466 hp (+55 hp, +13%) and torque from 2005 to 2295 Nm (+290 Nm). Diesel engines built in 2005 — the era of classic Common Rail without strong encryption.
The Mack Bulldog is the brand's iconic emblem. Mack specialises in heavy tractor units and construction machinery in the US. Mack has been part of the Volvo Group since 2000. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life. Top diesels in long-haul tractors sit at the power ceiling, and Stage 2 requires hardware. On older truck diesels, Stage 1 goes in over OBD with no complications.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How many horsepower does the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm reach after a remap?
Stage 1 for the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm adds +55 hp — power increases from 411 to 466 hp (+13%). Torque rises from 2005 to 2295 Nm (+290 Nm).
What does a Stage 1 remap of the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm include?
Stage 1 on the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +55 hp with no hardware changes.
What does Stage 1 give on the top-spec Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm?
On the top-spec Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm?
Stage 2 for the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Mack Trucks MP7?
Stage 1 on the Mack Trucks MP7 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm done?
The full remap cycle for the Mack Trucks MP7 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mack Trucks MP7?
The original Mack Trucks MP7 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm?
The cost of Stage 1 for the Mack Trucks MP7 MP7-405M (US04) 10.8 411hp (302kW) 2005Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.