Isuzu D-Max / Vcross 3.0 d 131 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Isuzu D-Max / Vcross 3.0 d 131 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Isuzu D-Max / Vcross 3.0 d 131 hp ECU
Isuzu D-Max / Vcross (2011 - RT) 3.0 d 131 hp — commercial diesel engine of the passenger segment of the Isuzu Motors group (Япония, 1916). Stage 1 chip tuning raises power from 131 to 165 hp (+34 hp, +26%) and torque from 278 to 352 Nm (+74 Nm). A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
The Isuzu Forward and Giga are long-haul trucks. The Isuzu D-MAX is a mainstream pickup in Asia and Africa. Isuzu is the world's largest maker of medium-duty trucks. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life. Mid-range diesels are a mainstream chip tuning subject in the commercial segment. Mid-generation truck models use standard OBD read/write.
The truck chip tuning community is an industry of its own, focused on long-haul routes. Stage 1 on truck diesels focuses on torque for loaded running. The professional logistics segment tunes for fuel consumption and pulling characteristics. Mid-range MAN trucks are a mainstream chip tuning subject in logistics.
Frequently asked questions
How much does the power of the Isuzu D-Max / Vcross 3.0 d 131 hp increase after Stage 1?
Stage 1 for the Isuzu D-Max / Vcross 3.0 d 131 hp adds +34 hp — power increases from 131 to 165 hp (+26%). Torque rises from 278 to 352 Nm (+74 Nm).
What does a Stage 1 remap of the Isuzu D-Max / Vcross 3.0 d 131 hp include?
Stage 1 on the Isuzu D-Max / Vcross 3.0 d 131 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +34 hp with no hardware changes.
Is a Stage 1 remap safe for the 3.0 d 131 hp?
Stage 1 on the Isuzu D-Max / Vcross 3.0 d 131 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Isuzu D-Max / Vcross 3.0 d 131 hp?
Stage 2 for the Isuzu D-Max / Vcross 3.0 d 131 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Isuzu D-Max / Vcross?
Stage 1 on the Isuzu D-Max / Vcross voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Isuzu D-Max / Vcross 3.0 d 131 hp done?
The full remap cycle for the Isuzu D-Max / Vcross — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Isuzu D-Max / Vcross?
The original Isuzu D-Max / Vcross ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Isuzu D-Max / Vcross 3.0 d 131 hp?
The cost of Stage 1 for the Isuzu D-Max / Vcross 3.0 d 131 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.