Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp ECU
Hyundai Starex - H-1 - H200 - i800 (2006 - TQ) 2.5 CRDI 170 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 170 to 200 hp (+30 hp, +18%) and torque from 392 to 463 Nm (+71 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp?
Stage 1 chip tuning on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp boosts engine output by 30 hp: from 170 to 200 hp. Torque rises from 392 to 463 Nm (+71 Nm).
What changes in the Hyundai Starex - H-1 - H200 - i800 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Starex - H-1 - H200 - i800 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp?
A remap of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp?
Stage 2 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp use?
The Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp is fitted with the Bosch EDC16C39 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Starex - H-1 - H200 - i800 remain valid after Stage 1?
After remapping the Hyundai Starex - H-1 - H200 - i800, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Starex - H-1 - H200 - i800?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Starex - H-1 - H200 - i800. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Starex - H-1 - H200 - i800?
Before Stage 1 the original of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp cost?
The remap price for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 170 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.