Citroen Jumper 2.0 BlueHDI 130 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Citroen Jumper 2.0 BlueHDI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 2.0 BlueHDI 130 hp ECU
Citroen Jumper (2014 - II - Phase II) 2.0 BlueHDI 130 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 130 to 200 hp (+70 hp, +54%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM6.2A, Delphi DCM6.2C. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen Jumper 2.0 BlueHDI 130 hp?
The Stage 1 gain for the Citroen Jumper 2.0 BlueHDI 130 hp is 70 hp (+54%) over the stock 130 hp, for a total of 200 hp. Torque rises from 340 to 400 Nm (+60 Nm).
What is Stage 1 chip tuning for the Citroen Jumper?
Stage 1 chip tuning of the Citroen Jumper is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +70 hp with no hardware changes.
Can you do Stage 1 on the Citroen Jumper 2.0 BlueHDI 130 hp?
Yes, Stage 1 for the Citroen Jumper 2.0 BlueHDI 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Citroen Jumper?
Stage 2 on the Citroen Jumper 2.0 BlueHDI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Citroen Jumper 2.0 BlueHDI 130 hp?
The Citroen Jumper 2.0 BlueHDI 130 hp was fitted with different ECUs depending on the year and trim: Delphi DCM6.2A, Delphi DCM6.2C. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Citroen Jumper warranty after chip tuning?
The factory warranty of the Citroen Jumper does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen Jumper take?
On the Citroen Jumper 2.0 BlueHDI 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen Jumper?
Yes, the original ECU firmware of the Citroen Jumper 2.0 BlueHDI 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen Jumper?
Stage 1 for the Citroen Jumper 2.0 BlueHDI 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.