Citroen Jumper 2.0 BlueHDI 110 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Citroen Jumper 2.0 BlueHDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 2.0 BlueHDI 110 hp ECU
Citroen Jumper (2014 - II - Phase II) 2.0 BlueHDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 200 hp (+90 hp, +82%) and torque from 304 to 450 Nm (+146 Nm). ECU — Delphi DCM6.2C. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2014 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Mid-range Citroen diesels are a mainstream chip tuning subject.
Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumper 2.0 BlueHDI 110 hp?
Stage 1 for the Citroen Jumper 2.0 BlueHDI 110 hp adds +90 hp — power increases from 110 to 200 hp (+82%). Torque rises from 304 to 450 Nm (+146 Nm).
What does a Stage 1 remap of the Citroen Jumper 2.0 BlueHDI 110 hp include?
Stage 1 on the Citroen Jumper 2.0 BlueHDI 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +90 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 BlueHDI 110 hp?
Stage 1 on the Citroen Jumper 2.0 BlueHDI 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen Jumper 2.0 BlueHDI 110 hp?
Stage 2 for the Citroen Jumper 2.0 BlueHDI 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Citroen Jumper 2.0 BlueHDI 110 hp run?
The control unit of the Citroen Jumper 2.0 BlueHDI 110 hp is the Delphi DCM6.2C. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen Jumper?
Stage 1 on the Citroen Jumper voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Jumper 2.0 BlueHDI 110 hp done?
The full remap cycle for the Citroen Jumper — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Jumper?
The original Citroen Jumper ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Jumper 2.0 BlueHDI 110 hp?
The cost of Stage 1 for the Citroen Jumper 2.0 BlueHDI 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.