Citroen Jumper 2.2 BlueHDI EU6b 140 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Citroen Jumper 2.2 BlueHDI EU6b 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 2.2 BlueHDI EU6b 140 hp ECU
Citroen Jumper (2019 - III) 2.2 BlueHDI EU6b 140 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 140 to 195 hp (+55 hp, +39%) and torque from 340 to 430 Nm (+90 Nm). This engine ships with different ECU variants: Delphi DCM7.1B, Bosch MG1CS069. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Mid-range Citroen diesels are a mainstream chip tuning subject.
The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. Modern Citroens use Tricore TPROT protection, so a Bench read is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumper 2.2 BlueHDI EU6b 140 hp?
After Stage 1 the power of the Citroen Jumper 2.2 BlueHDI EU6b 140 hp rises from 140 to 195 hp, a gain of 55 hp (+39%). Torque rises from 340 to 430 Nm (+90 Nm).
How does Stage 1 differ from stock on the Citroen Jumper?
Stage 1 chip tuning of the Citroen Jumper is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +55 hp with no hardware changes.
Can you do Stage 1 on the Citroen Jumper 2.2 BlueHDI EU6b 140 hp?
Yes, Stage 1 for the Citroen Jumper 2.2 BlueHDI EU6b 140 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Citroen Jumper?
Stage 2 on the Citroen Jumper 2.2 BlueHDI EU6b 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Citroen Jumper 2.2 BlueHDI EU6b 140 hp?
The Citroen Jumper 2.2 BlueHDI EU6b 140 hp was fitted with different ECUs depending on the year and trim: Delphi DCM7.1B, Bosch MG1CS069. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Citroen Jumper warranty after chip tuning?
The factory warranty of the Citroen Jumper does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen Jumper take?
On the Citroen Jumper 2.2 BlueHDI EU6b 140 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen Jumper?
Yes, the original ECU firmware of the Citroen Jumper 2.2 BlueHDI EU6b 140 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen Jumper?
Stage 1 for the Citroen Jumper 2.2 BlueHDI EU6b 140 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.