Citroen Jumper 3.0 HDI 160 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Citroen Jumper 3.0 HDI 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 3.0 HDI 160 hp ECU
Citroen Jumper (2006 - II - Phase I) 3.0 HDI 160 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 160 to 190 hp (+30 hp, +19%) and torque from 400 to 470 Nm (+70 Nm). In the CHIPOK database: 2 configurations. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Citroen Jumper 3.0 HDI 160 hp reach after a remap?
After Stage 1 the power of the Citroen Jumper 3.0 HDI 160 hp rises from 160 to 190 hp, a gain of 30 hp (+19%). Torque rises from 400 to 470 Nm (+70 Nm).
How does Stage 1 differ from stock on the Citroen Jumper?
Stage 1 on the Citroen Jumper 3.0 HDI 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 3.0 HDI 160 hp?
Stage 1 on the Citroen Jumper 3.0 HDI 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen Jumper 3.0 HDI 160 hp?
Stage 2 on the Citroen Jumper 3.0 HDI 160 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Citroen Jumper?
Stage 1 on the Citroen Jumper voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Jumper 3.0 HDI 160 hp done?
The full remap cycle for the Citroen Jumper — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Jumper?
The original Citroen Jumper ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Jumper 3.0 HDI 160 hp?
The cost of Stage 1 for the Citroen Jumper 3.0 HDI 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.