Citroen Jumper 2.2 HDI 110 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Citroen Jumper 2.2 HDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 2.2 HDI 110 hp ECU
Citroen Jumper (2006 - II - Phase I) 2.2 HDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 180 hp (+70 hp, +64%) and torque from 250 to 350 Nm (+100 Nm). This engine ships with different ECU variants: Siemens/Continental SID208, Visteon DCU-102. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Stage 1 on Citroen diesels delivers a noticeable torque gain. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Citroen Jumper 2.2 HDI 110 hp increase after Stage 1?
The Stage 1 gain for the Citroen Jumper 2.2 HDI 110 hp is 70 hp (+64%) over the stock 110 hp, for a total of 180 hp. Torque rises from 250 to 350 Nm (+100 Nm).
What is Stage 1 chip tuning for the Citroen Jumper?
Stage 1 chip tuning of the Citroen Jumper is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +70 hp with no hardware changes.
Can you do Stage 1 on the Citroen Jumper 2.2 HDI 110 hp?
Yes, Stage 1 for the Citroen Jumper 2.2 HDI 110 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Citroen Jumper?
Stage 2 on the Citroen Jumper 2.2 HDI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Citroen Jumper 2.2 HDI 110 hp?
The Citroen Jumper 2.2 HDI 110 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental SID208, Visteon DCU-102. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Citroen Jumper warranty after chip tuning?
The factory warranty of the Citroen Jumper does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen Jumper take?
On the Citroen Jumper 2.2 HDI 110 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen Jumper?
Yes, the original ECU firmware of the Citroen Jumper 2.2 HDI 110 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen Jumper?
Stage 1 for the Citroen Jumper 2.2 HDI 110 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.