Citroen Jumper 2.0 HDI 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Citroen Jumper 2.0 HDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Jumper 2.0 HDI 90 hp ECU
Citroen Jumper (2002 - I - Phase II) 2.0 HDI 90 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 205 to 250 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC15C2, Bosch EDC15C7, Siemens/Continental SID801. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Citroen Jumper 2.0 HDI 90 hp?
The Stage 1 gain for the Citroen Jumper 2.0 HDI 90 hp is 25 hp (+28%) over the stock 90 hp, for a total of 115 hp. Torque rises from 205 to 250 Nm (+45 Nm).
What is Stage 1 chip tuning for the Citroen Jumper?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Jumper with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Citroen Jumper?
Stage 1 on the base Citroen Jumper is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Citroen Jumper 2.0 HDI 90 hp?
Stage 2 on the Citroen Jumper 2.0 HDI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Citroen Jumper 2.0 HDI 90 hp built with?
The Citroen Jumper 2.0 HDI 90 hp comes with 3 ECU variants: Bosch EDC15C2, Bosch EDC15C7, Siemens/Continental SID801. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen Jumper remain valid after Stage 1?
After remapping the Citroen Jumper, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Jumper?
Reading and writing via OBD takes 25-30 minutes on the Citroen Jumper. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Jumper?
Before Stage 1 the original of the Citroen Jumper 2.0 HDI 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Jumper 2.0 HDI 90 hp cost?
The remap price for the Citroen Jumper 2.0 HDI 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.