Bosch MED17.1.1 Clone: VAG (Audi · Bentley · Lamborghini · Volkswagen)
Clone on the Bosch MED17.1.1 on the TC1796 processor control unit for vehicles of the VAG group: Audi, Bentley, Lamborghini, Volkswagen. Upload the dump — free analysis and check; apply the operation and download the ready file in your portal account.
Transfer of immo data from one ECU dump to another — the donor unit starts responding to the keys and BCM/CAS of the recipient vehicle.
| Operation | Clone |
|---|---|
| Control unit | Bosch MED17.1.1 |
| Car makes | VAG — Audi, Bentley, Lamborghini, Volkswagen |
| Processor (MCU) | TC1796 |
| Access / memory | INT FLASH [TC1796] · INT EEPROM [TC1796] |
| INT FLASH | TC1796 |
| INT EEPROM | TC1796 |
| Method | Online, from the ECU memory dump (.bin) |
| Applicability check | Free |
| Checksums | Recalculated automatically |
| Result | A ready file to write to the unit |
Bosch MED17.1.1 Clone — 46 vehicles
Operation Clone is supported for the Bosch MED17.1.1 block on vehicles of the VAG group (Audi, Bentley, Lamborghini, Volkswagen). In the list: Audi Q3 RS, Lamborghini Huracan, Bentley Continental Gt, Volkswagen Touareg, Audi R8, Bentley Continental GTC, Audi A8, Bentley Flying Spur and 38 more variants. Upload the dump — the system detects the version and checks applicability for free.
| Make | Model | Version | Year |
|---|---|---|---|
| Audi | Q3 RS | 2.5 TFSI quattro 7AT | 2016 |
| Lamborghini | Huracan | 5.2 V10 Sterrato | 2023 |
| Bentley | Continental Gt | 4.0 V8 S TwinTurbo 8AT | 2014 |
| Volkswagen | Touareg | 4.2 V8 FSI 8AT | 2010 |
| Audi | R8 | 5.2 FSI Spyder Quattro | 2016 |
| Bentley | Continental GTC | 4.0 V8 S TwinTurbo 8AT | 2014 |
| Audi | A8 | 2.0 TFSI Hybrid | 2012 |
| Bentley | Flying Spur | 4.0 V8 S TwinTurbo 8AT | 2016 |
| Audi | Q5 | 2.0 16v TFSI Hybrid quattro | 2012 |
| Audi | RS3 Sportback | 2.5 TFSI quattro 7AT | 2016 |
| Audi | RS6 Avant | 4.0 V8 TFSI quattro Tiptronic 8AT | 2015 |
| Audi | RS7 | 4.0 V8 TFSI quattro Tiptronic 8AT | 2014 |
| Audi | S6 | 4.0 V8 TFSI Quattro S-Tronic 7AT | 2015 |
| Audi | S7 | 4.0 V8 32v TFSI Quattro S-Tronic 7AT | 2015 |
| Audi | S8 | 4.0 V8 32v TFSI | 2013 |
| Audi | A6 | 2.0 TFSI Hybrid | 2011 |
| Audi | Q3 RS Performance | 2.5 TFSI quattro 7AT | 2016 |
| Audi | RS3 | 2.5 TFSI Quattro 7AT | 2016 |
| Audi | RS4 Avant | 4.2 V8 FSI Quattro S-Tronic 7AT | 2012 |
| Audi | RS5 Cabriolet | 4.2 V8 FSI Quattro S-Tronic 7AT | 2012 |
| Audi | RS5 Coupe | 4.2 V8 FSI Quattro S-Tronic 7AT | 2010 |
| Audi | RS6 Avant Performance | 4.0 V8 TFSI quattro Tiptronic 8AT | 2015 |
| Audi | RS7 Performance | 4.0 V8 TFSI quattro Tiptronic 8AT | 2015 |
| Audi | A8 | 4.2 FSI Quattro Tiptronic 8AT | 2010 |
| Audi | Q3 RS | 2.5 TFSI quattro 7AT | 2013 |
| Audi | Q3 RS | 2.5 TFSI quattro 7AT | 2015 |
| Audi | Q5 | 2.0 16v TFSI Hybrid quattro | 2011 |
| Audi | R8 | 5.2 FSI Quattro | 2015 |
| Audi | R8 | 5.2 FSI Quattro Plus | 2015 |
| Audi | RS3 Sportback | 2.5 TFSI quattro 7AT | 2015 |
| Audi | RS6 Avant | 4.0 V8 TFSI quattro Tiptronic 8AT | 2013 |
| Audi | RS7 | 4.0 V8 TFSI quattro Tiptronic 8AT | 2013 |
| Audi | S6 | 4.0 V8 TFSI Quattro S-Tronic 7AT | 2012 |
| Audi | S7 | 4.0 V8 32v TFSI Quattro S-Tronic 7AT | 2012 |
| Audi | S8 | 4.0 V8 32v TFSI | 2012 |
| Bentley | Continental GTC | 4.0 V8 TwinTurbo 8AT | 2012 |
| Bentley | Continental Gt | 4.0 V8 GT3-R TwinTurbo 8AT | 2014 |
| Bentley | Continental Gt | 4.0 V8 TwinTurbo 8AT | 2012 |
| Bentley | Flying Spur | 4.0 V8 TwinTurbo 8AT | 2014 |
| Lamborghini | Huracan | 5.2 V10 EVO AWD | 2019 |
| Lamborghini | Huracan | 5.2 V10 EVO RWD | 2020 |
| Lamborghini | Huracan | 5.2 V10 LP580-2 | 2015 |
| Lamborghini | Huracan | 5.2 V10 LP610-4 | 2014 |
| Lamborghini | Huracan | 5.2 V10 Performante | 2017 |
| Lamborghini | Huracan | 5.2 V10 STO | 2021 |
| Lamborghini | Huracan | 5.2 V10 Tecnica | 2022 |
Bosch MED17.1.1 Clone — for VAG (Audi, Bentley, Lamborghini, Volkswagen)
Cloning transfers the immobiliser data and identifiers from the original control unit into a donor one. After the operation the donor answers to the factory keys, BCM and CAS of the receiving car, and no dealer coding is required.
When you need Clone
- Board beyond repair — the board is flooded, burnt or mechanically damaged — the data moves into a donor.
- ECU reads but will not start — the contents are intact while the unit is faulty — the donor receives the same immobiliser data.
- Used donor unit — a unit from another car is tied to a foreign key and BCM.
- No access to dealer coding — the clone starts without a visit to an official dealer.
What you get: the donor unit works like the original — the keys, BCM and CAS of the car accept it without coding.
Bosch MED17.1.1 memory and reading
The Bosch MED17.1.1 unit uses on the TC1796 processor the following: INT FLASH — TC1796, INT EEPROM — TC1796. The Clone operation works on the INT FLASH [TC1796] · INT EEPROM [TC1796] area — that is the one to read out and upload. If OBD reading is not available for this unit, the dump is taken on the bench via Bench or Boot mode.
For the Bosch MED17.1.1 block on the TC1796 processor the «Clone» operation runs online from the ECU memory dump (access — INT FLASH [TC1796] · INT EEPROM [TC1796]). Read the file via OBD, Bench or Boot and upload it — the system detects Bosch MED17.1.1 and checks whether the operation applies for free. You'll get the ready file with recalculated checksums in your portal account.
Frequently asked questions
Clone on Bosch MED17.1.1 — short and to the point
What does Clone do on Bosch MED17.1.1?
Transfer of immo data from one ECU dump to another — the donor unit starts responding to the keys and BCM/CAS of the recipient vehicle.
Which file should I upload?
The ECU memory dump (access INT FLASH [TC1796] · INT EEPROM [TC1796]), read via OBD, Bench or Boot. Upload the file — the system detects Bosch MED17.1.1 for free and checks whether the operation applies.
How much does Clone cost?
Uploading and analyzing the file is free. Applying the operation and downloading the ready file happen in your portal account (50 €).
Are the checksums recalculated?
Yes, automatically. The ready file is immediately writable to the unit — no need to recalculate checksums by hand.
Which vehicles is it for?
Bosch MED17.1.1 with the Clone operation covers VAG group vehicles (Audi, Bentley, Lamborghini, Volkswagen). The system detects the exact version from the uploaded dump.
What memory and processor does Bosch MED17.1.1 use?
The unit is built around the TC1796 processor. Memory of the unit: INT FLASH — TC1796, INT EEPROM — TC1796. The Clone operation needs INT FLASH [TC1796] · INT EEPROM [TC1796] access.