Valtra C Series 150 150hp (110kW) 580Nm — Stage 1 file (+17 hp)
hp
Stage 1 file for Valtra C Series 150 150hp (110kW) 580Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra C Series 150 150hp (110kW) 580Nm ECU
Valtra C Series (I) 150 150hp (110kW) 580Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 150 to 167 hp (+17 hp, +11%) and torque from 580 to 735 Nm (+155 Nm).
Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Valtra C Series 150 150hp (110kW) 580Nm?
The Stage 1 gain for the Valtra C Series 150 150hp (110kW) 580Nm is 17 hp (+11%) over the stock 150 hp, for a total of 167 hp. Torque rises from 580 to 735 Nm (+155 Nm).
What is Stage 1 chip tuning for the Valtra C Series?
Stage 1 chip tuning of the Valtra C Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +17 hp with no hardware changes.
Can you do Stage 1 on the Valtra C Series 150 150hp (110kW) 580Nm?
Yes, Stage 1 for the Valtra C Series 150 150hp (110kW) 580Nm stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Valtra C Series?
Stage 2 on the Valtra C Series 150 150hp (110kW) 580Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Valtra C Series warranty after chip tuning?
The factory warranty of the Valtra C Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Valtra C Series take?
On the Valtra C Series 150 150hp (110kW) 580Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Valtra C Series?
Yes, the original ECU firmware of the Valtra C Series 150 150hp (110kW) 580Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Valtra C Series?
Stage 1 for the Valtra C Series 150 150hp (110kW) 580Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.