Valtra C Series 130 137hp (101kW) 510Nm — Stage 1 file (+31 hp)
hp
Stage 1 file for Valtra C Series 130 137hp (101kW) 510Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra C Series 130 137hp (101kW) 510Nm ECU
Valtra C Series (I) 130 137hp (101kW) 510Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 137 to 168 hp (+31 hp, +23%) and torque from 510 to 645 Nm (+135 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Valtra C Series 130 137hp (101kW) 510Nm increase after Stage 1?
Stage 1 chip tuning on the Valtra C Series 130 137hp (101kW) 510Nm boosts engine output by 31 hp: from 137 to 168 hp. Torque rises from 510 to 645 Nm (+135 Nm).
What changes in the Valtra C Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra C Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Valtra C Series 130 137hp (101kW) 510Nm?
A remap of the Valtra C Series 130 137hp (101kW) 510Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Valtra C Series 130 137hp (101kW) 510Nm?
Stage 2 for the Valtra C Series 130 137hp (101kW) 510Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Valtra C Series remain valid after Stage 1?
After remapping the Valtra C Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra C Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra C Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra C Series?
Before Stage 1 the original of the Valtra C Series 130 137hp (101kW) 510Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra C Series 130 137hp (101kW) 510Nm cost?
The remap price for the Valtra C Series 130 137hp (101kW) 510Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.