Valtra C Series 130 135hp (99kW) 510Nm — Stage 1 file (+33 hp)
hp
Stage 1 file for Valtra C Series 130 135hp (99kW) 510Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra C Series 130 135hp (99kW) 510Nm ECU
Valtra C Series (I) 130 135hp (99kW) 510Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 135 to 168 hp (+33 hp, +24%) and torque from 510 to 605 Nm (+95 Nm).
Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Valtra C Series 130 135hp (99kW) 510Nm increase after Stage 1?
Stage 1 for the Valtra C Series 130 135hp (99kW) 510Nm adds +33 hp — power increases from 135 to 168 hp (+24%). Torque rises from 510 to 605 Nm (+95 Nm).
What does a Stage 1 remap of the Valtra C Series 130 135hp (99kW) 510Nm include?
Stage 1 chip tuning of the Valtra C Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +33 hp with no hardware changes.
Can you do Stage 1 on the Valtra C Series 130 135hp (99kW) 510Nm?
Yes, Stage 1 for the Valtra C Series 130 135hp (99kW) 510Nm stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Valtra C Series?
Stage 2 for the Valtra C Series 130 135hp (99kW) 510Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Valtra C Series warranty after chip tuning?
The factory warranty of the Valtra C Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Valtra C Series take?
On the Valtra C Series 130 135hp (99kW) 510Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Valtra C Series?
Yes, the original ECU firmware of the Valtra C Series 130 135hp (99kW) 510Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Valtra C Series?
Stage 1 for the Valtra C Series 130 135hp (99kW) 510Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.