Subaru Forester 2.0ie e-BOXER 150 hp — Stage 1 file
hp
Stage 1 file for Subaru Forester 2.0ie e-BOXER 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru Forester 2.0ie e-BOXER 150 hp ECU
Subaru Forester (2024) 2.0ie e-BOXER 150 hp — mass-market hybrid engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). In the CHIPOK database: 2 configurations.
Subaru uses permanent all-wheel drive (AWD) on most of its models. The WRX STI is Subaru's iconic rally model. Subaru is a Japanese carmaker specialising in flat engines and all-wheel drive. e-Boxer is the brand's hybrid technology. The Subaru Solterra is the flagship electric crossover built on the Toyota bZ4X platform.
The Subaru community in JDM and rally culture is the largest for the WRX/STI. Mid-range Subaru models use naturally aspirated Boxer engines with a conservative calibration.
Frequently asked questions
What is Stage 1 chip tuning for the Subaru Forester?
Stage 1 chip tuning of the Subaru Forester is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters.
Can you do Stage 1 on the Subaru Forester 2.0ie e-BOXER 150 hp?
Yes, Stage 1 for the Subaru Forester 2.0ie e-BOXER 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Subaru Forester?
Stage 2 on the Subaru Forester 2.0ie e-BOXER 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Subaru Forester warranty after chip tuning?
The factory warranty of the Subaru Forester does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Subaru Forester take?
On the Subaru Forester 2.0ie e-BOXER 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Subaru Forester?
Yes, the original ECU firmware of the Subaru Forester 2.0ie e-BOXER 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Subaru Forester?
Stage 1 for the Subaru Forester 2.0ie e-BOXER 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.