Subaru Forester 2.0 D 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Subaru Forester 2.0 D 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Subaru Forester 2.0 D 150 hp ECU
Subaru Forester (2008) 2.0 D 150 hp — mass-market diesel engine of the passenger segment of the Subaru Corporation (Toyota владеет 20%) group (Япония, 1953). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 350 to 400 Nm (+50 Nm). The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Subaru uses permanent all-wheel drive (AWD) on most of its models. The WRX STI is Subaru's iconic rally model. Subaru is a Japanese carmaker specialising in flat engines and all-wheel drive. Subaru Boxer diesels are a niche chip tuning segment. Subaru has unique flat diesel engines (Boxer Diesel). Subaru diesels are rare and were aimed mainly at the European market.
The Subaru community in JDM and rally culture is the largest for the WRX/STI. Mid-range Subaru models use naturally aspirated Boxer engines with a conservative calibration.
Frequently asked questions
How much does the power of the Subaru Forester 2.0 D 150 hp increase after Stage 1?
The Stage 1 gain for the Subaru Forester 2.0 D 150 hp is 25 hp (+17%) over the stock 150 hp, for a total of 175 hp. Torque rises from 350 to 400 Nm (+50 Nm).
What is Stage 1 chip tuning for the Subaru Forester?
Stage 1 chip tuning of the Subaru Forester is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Subaru Forester 2.0 D 150 hp?
Yes, Stage 1 for the Subaru Forester 2.0 D 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Subaru Forester?
Stage 2 on the Subaru Forester 2.0 D 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Subaru Forester warranty after chip tuning?
The factory warranty of the Subaru Forester does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Subaru Forester take?
On the Subaru Forester 2.0 D 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Subaru Forester?
Yes, the original ECU firmware of the Subaru Forester 2.0 D 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Subaru Forester?
Stage 1 for the Subaru Forester 2.0 D 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.