Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm — Stage 1 file (+37 hp)
hp
Stage 1 file for Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm ECU
Steyr 6000serie (I) 6225 CVT 225hp (165kW) 850Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 225 to 262 hp (+37 hp, +16%) and torque from 850 to 995 Nm (+145 Nm).
Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Steyr — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm reach after a remap?
Stage 1 for the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm adds +37 hp — power increases from 225 to 262 hp (+16%). Torque rises from 850 to 995 Nm (+145 Nm).
What does a Stage 1 remap of the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm include?
Stage 1 chip tuning of the Steyr 6000serie is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +37 hp with no hardware changes.
Is Stage 1 safe on the high-output Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm?
Stage 1 on the powerful Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Steyr 6000serie?
Stage 2 for the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Steyr 6000serie warranty after chip tuning?
The factory warranty of the Steyr 6000serie does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Steyr 6000serie take?
On the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Steyr 6000serie?
Yes, the original ECU firmware of the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Steyr 6000serie?
Stage 1 for the Steyr 6000serie 6225 CVT 225hp (165kW) 850Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.