Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm — Stage 1 file (+44 hp)
hp
Stage 1 file for Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm ECU
Steyr 6000serie (I) 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 162 to 206 hp (+44 hp, +27%) and torque from 767 to 936 Nm (+169 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm?
Stage 1 for the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm adds +44 hp — power increases from 162 to 206 hp (+27%). Torque rises from 767 to 936 Nm (+169 Nm).
What does a Stage 1 remap of the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr 6000serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +44 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm?
A remap of the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm?
Stage 2 for the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Steyr 6000serie remain valid after Stage 1?
After remapping the Steyr 6000serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr 6000serie?
Reading and writing via OBD takes 25-30 minutes on the Steyr 6000serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr 6000serie?
Before Stage 1 the original of the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm cost?
The remap price for the Steyr 6000serie 6160 6.7 CVT Ecotech 162hp (119kW) 767Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.