Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm — Stage 1 file (+44 hp)
hp
Stage 1 file for Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm ECU
Steyr 6000serie (I) 6195 CVT 196hp (144kW) 792Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 196 to 240 hp (+44 hp, +22%) and torque from 792 to 946 Nm (+154 Nm).
Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm?
After Stage 1 the power of the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm rises from 196 to 240 hp, a gain of 44 hp (+22%). Torque rises from 792 to 946 Nm (+154 Nm).
How does Stage 1 differ from stock on the Steyr 6000serie?
Stage 1 on the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +44 hp with no hardware changes.
Is a Stage 1 remap safe for the 6195 CVT 196hp (144kW) 792Nm?
Stage 1 on the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm?
Stage 2 on the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Steyr 6000serie?
Stage 1 on the Steyr 6000serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm done?
The full remap cycle for the Steyr 6000serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Steyr 6000serie?
The original Steyr 6000serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm?
The cost of Stage 1 for the Steyr 6000serie 6195 CVT 196hp (144kW) 792Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.