Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm — Stage 1 file (+41 hp)
hp
Stage 1 file for Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm ECU
Steyr 6000serie (I) 6170 CVT 171hp (126kW) 725Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 171 to 212 hp (+41 hp, +24%) and torque from 725 to 866 Nm (+141 Nm).
Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm?
Stage 1 chip tuning on the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm boosts engine output by 41 hp: from 171 to 212 hp. Torque rises from 725 to 866 Nm (+141 Nm).
What changes in the Steyr 6000serie ECU after Stage 1?
Stage 1 on the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +41 hp with no hardware changes.
Is a Stage 1 remap safe for the 6170 CVT 171hp (126kW) 725Nm?
Stage 1 on the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm?
Stage 2 for the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Steyr 6000serie?
Stage 1 on the Steyr 6000serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm done?
The full remap cycle for the Steyr 6000serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Steyr 6000serie?
The original Steyr 6000serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm?
The cost of Stage 1 for the Steyr 6000serie 6170 CVT 171hp (126kW) 725Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.