Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm — Stage 1 file (+36 hp)
hp
Stage 1 file for Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm ECU
Steyr 6000serie (I) 6155 CVT 156hp (115kW) 660Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 156 to 192 hp (+36 hp, +23%) and torque from 660 to 786 Nm (+126 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm?
After Stage 1 the power of the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm rises from 156 to 192 hp, a gain of 36 hp (+23%). Torque rises from 660 to 786 Nm (+126 Nm).
How does Stage 1 differ from stock on the Steyr 6000serie?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr 6000serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +36 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm?
A remap of the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm?
Stage 2 on the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Steyr 6000serie remain valid after Stage 1?
After remapping the Steyr 6000serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr 6000serie?
Reading and writing via OBD takes 25-30 minutes on the Steyr 6000serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr 6000serie?
Before Stage 1 the original of the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm cost?
The remap price for the Steyr 6000serie 6155 CVT 156hp (115kW) 660Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.