Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm — Stage 1 file (+17 hp)
hp
Stage 1 file for Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm ECU
Steyr 6000serie (I) 6150 CVT 151hp (111kW) 520Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 151 to 168 hp (+17 hp, +11%) and torque from 520 to 648 Nm (+128 Nm).
Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm reach after a remap?
Stage 1 for the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm adds +17 hp — power increases from 151 to 168 hp (+11%). Torque rises from 520 to 648 Nm (+128 Nm).
What does a Stage 1 remap of the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Steyr 6000serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +17 hp with no hardware changes.
What is the risk of Stage 1 on the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm?
A remap of the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm?
Stage 2 for the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Steyr 6000serie remain valid after Stage 1?
After remapping the Steyr 6000serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Steyr 6000serie?
Reading and writing via OBD takes 25-30 minutes on the Steyr 6000serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Steyr 6000serie?
Before Stage 1 the original of the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm cost?
The remap price for the Steyr 6000serie 6150 CVT 151hp (111kW) 520Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.