Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm — Stage 1 file (+33 hp)
hp
Stage 1 file for Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm ECU
Steyr 6000serie (I) 6145 CVT 147hp (108kW) 610Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 147 to 180 hp (+33 hp, +22%) and torque from 610 to 725 Nm (+115 Nm).
Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm reach after a remap?
The Stage 1 gain for the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm is 33 hp (+22%) over the stock 147 hp, for a total of 180 hp. Torque rises from 610 to 725 Nm (+115 Nm).
What is Stage 1 chip tuning for the Steyr 6000serie?
Stage 1 chip tuning of the Steyr 6000serie is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +33 hp with no hardware changes.
Can you do Stage 1 on the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm?
Yes, Stage 1 for the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Steyr 6000serie?
Stage 2 on the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Steyr 6000serie warranty after chip tuning?
The factory warranty of the Steyr 6000serie does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Steyr 6000serie take?
On the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Steyr 6000serie?
Yes, the original ECU firmware of the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Steyr 6000serie?
Stage 1 for the Steyr 6000serie 6145 CVT 147hp (108kW) 610Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.