Steyr 6000serie 6140 141hp (104kW) 613Nm — Stage 1 file (+16 hp)
hp
Stage 1 file for Steyr 6000serie 6140 141hp (104kW) 613Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6140 141hp (104kW) 613Nm ECU
Steyr 6000serie (I) 6140 141hp (104kW) 613Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 141 to 157 hp (+16 hp, +11%) and torque from 613 to 666 Nm (+53 Nm).
Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Steyr is part of CNH Industrial. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Steyr 6000serie 6140 141hp (104kW) 613Nm increase after Stage 1?
Stage 1 chip tuning on the Steyr 6000serie 6140 141hp (104kW) 613Nm boosts engine output by 16 hp: from 141 to 157 hp. Torque rises from 613 to 666 Nm (+53 Nm).
What changes in the Steyr 6000serie ECU after Stage 1?
Stage 1 on the Steyr 6000serie 6140 141hp (104kW) 613Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +16 hp with no hardware changes.
Is a Stage 1 remap safe for the 6140 141hp (104kW) 613Nm?
Stage 1 on the Steyr 6000serie 6140 141hp (104kW) 613Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Steyr 6000serie 6140 141hp (104kW) 613Nm?
Stage 2 for the Steyr 6000serie 6140 141hp (104kW) 613Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Steyr 6000serie?
Stage 1 on the Steyr 6000serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Steyr 6000serie 6140 141hp (104kW) 613Nm done?
The full remap cycle for the Steyr 6000serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Steyr 6000serie?
The original Steyr 6000serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Steyr 6000serie 6140 141hp (104kW) 613Nm?
The cost of Stage 1 for the Steyr 6000serie 6140 141hp (104kW) 613Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.