Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm ECU
Steyr 6000serie (I) 6130 6.7 CVT 133hp (98kW) 631Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Австрия, 1934). Stage 1 chip tuning raises power from 133 to 163 hp (+30 hp, +23%) and torque from 631 to 796 Nm (+165 Nm).
Steyr is part of CNH Industrial. Steyr specialises in tractors for Alpine regions. Steyr is an Austrian tractor manufacturer, founded in 1934. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Steyr среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm?
Stage 1 chip tuning on the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm boosts engine output by 30 hp: from 133 to 163 hp. Torque rises from 631 to 796 Nm (+165 Nm).
What changes in the Steyr 6000serie ECU after Stage 1?
Stage 1 chip tuning of the Steyr 6000serie is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm?
Yes, Stage 1 for the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Steyr 6000serie?
Stage 2 for the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Steyr 6000serie warranty after chip tuning?
The factory warranty of the Steyr 6000serie does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Steyr 6000serie take?
On the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Steyr 6000serie?
Yes, the original ECU firmware of the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Steyr 6000serie?
Stage 1 for the Steyr 6000serie 6130 6.7 CVT 133hp (98kW) 631Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.