Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp — Stage 1 file (+68 hp)
hp
Stage 1 file for Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp ECU
Skoda Superb (2019) 2.0 TDI CR EU6 (2019) 122 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 122 to 190 hp (+68 hp, +56%) and torque from 250 to 420 Nm (+170 Nm). A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. The Skoda diesel range is fully shared with VW on the MQB platform.
On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What is the Stage 1 effect on the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp?
After Stage 1 the power of the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp rises from 122 to 190 hp, a gain of 68 hp (+56%). Torque rises from 250 to 420 Nm (+170 Nm).
How does Stage 1 differ from stock on the Skoda Superb?
Stage 1 on the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +68 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TDI CR EU6 (2019) 122 hp?
Stage 1 on the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp?
Stage 2 on the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Skoda Superb?
Stage 1 on the Skoda Superb voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp done?
The full remap cycle for the Skoda Superb — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Superb?
The original Skoda Superb ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp?
The cost of Stage 1 for the Skoda Superb 2.0 TDI CR EU6 (2019) 122 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.