Skoda Superb 2.0 TDI CR EU6 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Superb 2.0 TDI CR EU6 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 2.0 TDI CR EU6 150 hp ECU
Skoda Superb (2019) 2.0 TDI CR EU6 150 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 320 to 420 Nm (+100 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 16 configurations · 8 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. Skoda is a high-volume chip tuning subject in Eastern Europe and among taxi fleets.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Superb 2.0 TDI CR EU6 150 hp?
The Stage 1 gain for the Skoda Superb 2.0 TDI CR EU6 150 hp is 35 hp (+23%) over the stock 150 hp, for a total of 185 hp. Torque rises from 320 to 420 Nm (+100 Nm).
What is Stage 1 chip tuning for the Skoda Superb?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Superb 2.0 TDI CR EU6 150 hp?
A remap of the Skoda Superb 2.0 TDI CR EU6 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Superb 2.0 TDI CR EU6 150 hp?
Stage 2 on the Skoda Superb 2.0 TDI CR EU6 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Superb 2.0 TDI CR EU6 150 hp built with?
The Skoda Superb 2.0 TDI CR EU6 150 hp comes with 4 ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB)) on the Skoda Superb be calibrated?
The Skoda Superb 2.0 TDI CR EU6 150 hp has 4 TCU variants: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 2.0 TDI CR EU6 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 2.0 TDI CR EU6 150 hp cost?
The remap price for the Skoda Superb 2.0 TDI CR EU6 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.