Skoda Superb 1.6 TDI EU6 120 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Superb 1.6 TDI EU6 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.6 TDI EU6 120 hp ECU
Skoda Superb (2019) 1.6 TDI EU6 120 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 120 to 145 hp (+25 hp, +21%) and torque from 260 to 310 Nm (+50 Nm). In the CHIPOK database: 2 configurations. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1. Skoda shares ECUs and calibration algorithms with VW. Mid-range Skoda turbo petrol engines are a high-volume Stage 1 subject.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Skoda Superb 1.6 TDI EU6 120 hp?
Stage 1 for the Skoda Superb 1.6 TDI EU6 120 hp adds +25 hp — power increases from 120 to 145 hp (+21%). Torque rises from 260 to 310 Nm (+50 Nm).
What does a Stage 1 remap of the Skoda Superb 1.6 TDI EU6 120 hp include?
Stage 1 on the Skoda Superb 1.6 TDI EU6 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 TDI EU6 120 hp?
Stage 1 on the Skoda Superb 1.6 TDI EU6 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Superb 1.6 TDI EU6 120 hp?
Stage 2 for the Skoda Superb 1.6 TDI EU6 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Skoda Superb?
Stage 1 on the Skoda Superb voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Superb 1.6 TDI EU6 120 hp done?
The full remap cycle for the Skoda Superb — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Superb?
The original Skoda Superb ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Superb 1.6 TDI EU6 120 hp?
The cost of Stage 1 for the Skoda Superb 1.6 TDI EU6 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.