Skoda Superb 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Skoda Superb 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.5 TSI 150 hp ECU
Skoda Superb (2019) 1.5 TSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. The Skoda RS range is a performance sub-brand with turbo engines and 4x4. The MQB platform allows ECU commonality with Volkswagen, Audi and Seat. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
Protection on modern Skoda RS models is tight, so Bench is required. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models.
Frequently asked questions
How many horsepower does the Skoda Superb 1.5 TSI 150 hp reach after a remap?
Stage 1 chip tuning on the Skoda Superb 1.5 TSI 150 hp boosts engine output by 25 hp: from 150 to 175 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What changes in the Skoda Superb ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Superb 1.5 TSI 150 hp?
A remap of the Skoda Superb 1.5 TSI 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Superb 1.5 TSI 150 hp?
Stage 2 for the Skoda Superb 1.5 TSI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Skoda Superb 1.5 TSI 150 hp use?
The Skoda Superb 1.5 TSI 150 hp is fitted with the Bosch MG1CS011 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x) on the Skoda Superb be calibrated?
The Skoda Superb 1.5 TSI 150 hp has 3 TCU variants: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 1.5 TSI 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 1.5 TSI 150 hp cost?
The remap price for the Skoda Superb 1.5 TSI 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.