Skoda Superb 1.4 TSI Hybrid 218 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Skoda Superb 1.4 TSI Hybrid 218 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.4 TSI Hybrid 218 hp ECU
Skoda Superb (2019) 1.4 TSI Hybrid 218 hp — mass-market hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 218 to 238 hp (+20 hp, +9%) and torque from 400 to 460 Nm (+60 Nm).
RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. On PHEV Skoda models, the ICE side is tuned just like a pure combustion engine. iV is Skoda's designation for its electric and PHEV models. Skoda PHEV variants combine a TSI engine with an electric motor.
Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Protection on modern Skoda RS models is tight, so Bench is required. On Skoda RS models, Stage 1 works trouble-free on stock hardware. High-output Skoda engines are the RS range, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Skoda Superb 1.4 TSI Hybrid 218 hp reach after a remap?
Stage 1 chip tuning on the Skoda Superb 1.4 TSI Hybrid 218 hp boosts engine output by 20 hp: from 218 to 238 hp. Torque rises from 400 to 460 Nm (+60 Nm).
What changes in the Skoda Superb ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Skoda Superb?
Stage 1 on the powerful Skoda Superb 1.4 TSI Hybrid 218 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Skoda Superb 1.4 TSI Hybrid 218 hp?
Stage 2 for the Skoda Superb 1.4 TSI Hybrid 218 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 1.4 TSI Hybrid 218 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 1.4 TSI Hybrid 218 hp cost?
The remap price for the Skoda Superb 1.4 TSI Hybrid 218 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.