Skoda Superb 2.0 TDI CR EU6 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Superb 2.0 TDI CR EU6 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 2.0 TDI CR EU6 150 hp ECU
Skoda Superb (2015) 2.0 TDI CR EU6 150 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 320 to 420 Nm (+100 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 16 configurations · 8 ECU variants. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Mid-range Skoda diesels are a mainstream chip tuning subject across Europe.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
DSG comes in dry- and wet-clutch versions. The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Superb 2.0 TDI CR EU6 150 hp?
Stage 1 chip tuning on the Skoda Superb 2.0 TDI CR EU6 150 hp boosts engine output by 35 hp: from 150 to 185 hp. Torque rises from 320 to 420 Nm (+100 Nm).
What changes in the Skoda Superb ECU after Stage 1?
Stage 1 chip tuning of the Skoda Superb is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Skoda Superb 2.0 TDI CR EU6 150 hp?
Yes, Stage 1 for the Skoda Superb 2.0 TDI CR EU6 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Superb?
Stage 2 for the Skoda Superb 2.0 TDI CR EU6 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Skoda Superb 2.0 TDI CR EU6 150 hp?
The Skoda Superb 2.0 TDI CR EU6 150 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17C74, Bosch MD1CS004. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Skoda Superb 2.0 TDI CR EU6 150 hp have?
The Skoda Superb 2.0 TDI CR EU6 150 hp comes with 4 different automatic-transmission TCU units: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Superb warranty after chip tuning?
The factory warranty of the Skoda Superb does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Superb take?
On the Skoda Superb 2.0 TDI CR EU6 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Superb?
Yes, the original ECU firmware of the Skoda Superb 2.0 TDI CR EU6 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Superb?
Stage 1 for the Skoda Superb 2.0 TDI CR EU6 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.