Skoda Superb 1.4 TSI/TFSI S&S 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Superb 1.4 TSI/TFSI S&S 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.4 TSI/TFSI S&S 150 hp ECU
Skoda Superb (2015) 1.4 TSI/TFSI S&S 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The factory calibration of Skoda petrol engines is conservative, leaving headroom for Stage 1.
On pre-2017 Skoda models, Stage 1 is done via OBD without bench. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On Skoda, Stage 1 usually fits within the standard turnaround time. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+. DSG comes in dry- and wet-clutch versions.
Frequently asked questions
How many horsepower does the Skoda Superb 1.4 TSI/TFSI S&S 150 hp reach after a remap?
Stage 1 for the Skoda Superb 1.4 TSI/TFSI S&S 150 hp adds +30 hp — power increases from 150 to 180 hp (+20%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Skoda Superb 1.4 TSI/TFSI S&S 150 hp include?
Stage 1 chip tuning of the Skoda Superb is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Skoda Superb 1.4 TSI/TFSI S&S 150 hp?
Yes, Stage 1 for the Skoda Superb 1.4 TSI/TFSI S&S 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Superb?
Stage 2 for the Skoda Superb 1.4 TSI/TFSI S&S 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Skoda Superb 1.4 TSI/TFSI S&S 150 hp?
The Skoda Superb 1.4 TSI/TFSI S&S 150 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Skoda Superb 1.4 TSI/TFSI S&S 150 hp have?
The Skoda Superb 1.4 TSI/TFSI S&S 150 hp comes with 2 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Skoda Superb warranty after chip tuning?
The factory warranty of the Skoda Superb does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Superb take?
On the Skoda Superb 1.4 TSI/TFSI S&S 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Superb?
Yes, the original ECU firmware of the Skoda Superb 1.4 TSI/TFSI S&S 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Superb?
Stage 1 for the Skoda Superb 1.4 TSI/TFSI S&S 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.