Skoda Superb 1.4 TSI/TFSI S&S 125 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Superb 1.4 TSI/TFSI S&S 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.4 TSI/TFSI S&S 125 hp ECU
Skoda Superb (2015) 1.4 TSI/TFSI S&S 125 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 125 to 155 hp (+30 hp, +24%) and torque from 200 to 250 Nm (+50 Nm). ECU — Bosch MED17.2.5. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 3 configurations · 3 ECU variants. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. The Skoda community in Eastern Europe is one of the most active in chip tuning. Skoda's slogan is “Simply Clever”. The Skoda RS range is a performance sub-brand with turbo engines and 4x4.
On Skoda, Stage 1 usually fits within the standard turnaround time. On mid-range standard Skoda petrol engines, Stage 1 delivers a noticeable gain. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
The DSG is VAG's signature dual-clutch gearbox, fitted to Skoda models with transverse engines. Tiptronic is the classic automatic for Skoda's top models. The DSG's TCU needs recalibration at Stage 1+.
Frequently asked questions
How much does the power of the Skoda Superb 1.4 TSI/TFSI S&S 125 hp increase after Stage 1?
After Stage 1 the power of the Skoda Superb 1.4 TSI/TFSI S&S 125 hp rises from 125 to 155 hp, a gain of 30 hp (+24%). Torque rises from 200 to 250 Nm (+50 Nm).
How does Stage 1 differ from stock on the Skoda Superb?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Superb 1.4 TSI/TFSI S&S 125 hp?
A remap of the Skoda Superb 1.4 TSI/TFSI S&S 125 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Superb 1.4 TSI/TFSI S&S 125 hp?
Stage 2 on the Skoda Superb 1.4 TSI/TFSI S&S 125 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Skoda Superb 1.4 TSI/TFSI S&S 125 hp use?
The Skoda Superb 1.4 TSI/TFSI S&S 125 hp is fitted with the Bosch MED17.2.5 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Skoda Superb be calibrated?
The Skoda Superb 1.4 TSI/TFSI S&S 125 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 1.4 TSI/TFSI S&S 125 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 1.4 TSI/TFSI S&S 125 hp cost?
The remap price for the Skoda Superb 1.4 TSI/TFSI S&S 125 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.