Skoda Superb 1.9 TDI IP 100 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Skoda Superb 1.9 TDI IP 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.9 TDI IP 100 hp ECU
Skoda Superb (2008) 1.9 TDI IP 100 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 100 to 140 hp (+40 hp, +40%) and torque from 210 to 300 Nm (+90 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. On older Skoda diesels, Stage 1 is flashed via OBD without any complications.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the Skoda Superb 1.9 TDI IP 100 hp reach after a remap?
The Stage 1 gain for the Skoda Superb 1.9 TDI IP 100 hp is 40 hp (+40%) over the stock 100 hp, for a total of 140 hp. Torque rises from 210 to 300 Nm (+90 Nm).
What is Stage 1 chip tuning for the Skoda Superb?
Stage 1 on the Skoda Superb 1.9 TDI IP 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 TDI IP 100 hp?
Stage 1 on the Skoda Superb 1.9 TDI IP 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Skoda Superb 1.9 TDI IP 100 hp?
Stage 2 on the Skoda Superb 1.9 TDI IP 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Skoda Superb 1.9 TDI IP 100 hp run?
The control unit of the Skoda Superb 1.9 TDI IP 100 hp is the Bosch EDC15P+. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Skoda Superb?
Stage 1 on the Skoda Superb voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Skoda Superb 1.9 TDI IP 100 hp done?
The full remap cycle for the Skoda Superb — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Skoda Superb?
The original Skoda Superb ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Skoda Superb 1.9 TDI IP 100 hp?
The cost of Stage 1 for the Skoda Superb 1.9 TDI IP 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.