Skoda Superb 1.8 TSI / TFSI 150 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Skoda Superb 1.8 TSI / TFSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.8 TSI / TFSI 150 hp ECU
Skoda Superb (2008) 1.8 TSI / TFSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 150 to 190 hp (+40 hp, +27%) and torque from 210 to 320 Nm (+110 Nm). The 2008 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Skoda shares ECUs and calibration algorithms with VW.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Skoda Superb 1.8 TSI / TFSI 150 hp reach after a remap?
The Stage 1 gain for the Skoda Superb 1.8 TSI / TFSI 150 hp is 40 hp (+27%) over the stock 150 hp, for a total of 190 hp. Torque rises from 210 to 320 Nm (+110 Nm).
What is Stage 1 chip tuning for the Skoda Superb?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Superb 1.8 TSI / TFSI 150 hp?
A remap of the Skoda Superb 1.8 TSI / TFSI 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Superb 1.8 TSI / TFSI 150 hp?
Stage 2 on the Skoda Superb 1.8 TSI / TFSI 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 1.8 TSI / TFSI 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 1.8 TSI / TFSI 150 hp cost?
The remap price for the Skoda Superb 1.8 TSI / TFSI 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.