Skoda Superb 2.0i 115 hp — Stage 1 file (+15 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Skoda Superb 2.0i 115 hp ECU

Skoda Superb (2003) 2.0i 115 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 130 hp (+15 hp, +13%) and torque from 166 to 186 Nm (+20 Nm). The 2003 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.

Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. TSI is Skoda's petrol turbo engine designation, shared with VW and Audi.

On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe.

Frequently asked questions

What is the Stage 1 effect on the Skoda Superb 2.0i 115 hp?

The Stage 1 gain for the Skoda Superb 2.0i 115 hp is 15 hp (+13%) over the stock 115 hp, for a total of 130 hp. Torque rises from 166 to 186 Nm (+20 Nm).

What is Stage 1 chip tuning for the Skoda Superb?

Stage 1 on the Skoda Superb 2.0i 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.

Is a Stage 1 remap safe for the 2.0i 115 hp?

Stage 1 on the Skoda Superb 2.0i 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Skoda Superb 2.0i 115 hp?

Stage 2 on the Skoda Superb 2.0i 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the Skoda Superb?

Stage 1 on the Skoda Superb voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Skoda Superb 2.0i 115 hp done?

The full remap cycle for the Skoda Superb — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Skoda Superb?

The original Skoda Superb ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Skoda Superb 2.0i 115 hp?

The cost of Stage 1 for the Skoda Superb 2.0i 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno