Skoda Superb 1.9 TDI IP 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Skoda Superb 1.9 TDI IP 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.9 TDI IP 130 hp ECU
Skoda Superb (2003) 1.9 TDI IP 130 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 310 to 365 Nm (+55 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. The 2003 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Skoda is a high-volume VAG brand focused on practicality and affordable pricing. Skoda has been part of the Volkswagen Group (VAG) since 1991. Skoda is a Czech carmaker from Mlada Boleslav, founded in 1895 and one of the oldest car factories in the world. Skoda is a high-volume chip tuning subject in Eastern Europe and among taxi fleets.
On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.
Frequently asked questions
What is the Stage 1 effect on the Skoda Superb 1.9 TDI IP 130 hp?
The Stage 1 gain for the Skoda Superb 1.9 TDI IP 130 hp is 30 hp (+23%) over the stock 130 hp, for a total of 160 hp. Torque rises from 310 to 365 Nm (+55 Nm).
What is Stage 1 chip tuning for the Skoda Superb?
Stage 1 chip tuning of the Skoda Superb is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Skoda Superb 1.9 TDI IP 130 hp?
Yes, Stage 1 for the Skoda Superb 1.9 TDI IP 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Skoda Superb?
Stage 2 on the Skoda Superb 1.9 TDI IP 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Skoda Superb 1.9 TDI IP 130 hp?
The Skoda Superb 1.9 TDI IP 130 hp ECU is the Bosch EDC15P+. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Skoda Superb warranty after chip tuning?
The factory warranty of the Skoda Superb does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Skoda Superb take?
On the Skoda Superb 1.9 TDI IP 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Skoda Superb?
Yes, the original ECU firmware of the Skoda Superb 1.9 TDI IP 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Skoda Superb?
Stage 1 for the Skoda Superb 1.9 TDI IP 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.