Skoda Superb 1.9 TDI IP 115 hp — Stage 1 file (+31 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Skoda Superb 1.9 TDI IP 115 hp ECU

Skoda Superb (2003) 1.9 TDI IP 115 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 115 to 146 hp (+31 hp, +27%) and torque from 285 to 350 Nm (+65 Nm). This engine ships with different ECU variants: Bosch EDC15P+, Bosch EDC16U31. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2003 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Skoda's slogan is “Simply Clever”. RS is Skoda's performance sub-brand, the equivalent of VW's GTI. The Skoda range covers compacts, saloons, SUVs and family estates. The Skoda diesel range is fully shared with VW on the MQB platform.

On Skoda, Stage 1 usually fits within the standard turnaround time. Within the VAG group, ECUs are standardised, so Skoda files often work on VW/Audi/Seat. The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life.

Frequently asked questions

What is the Stage 1 effect on the Skoda Superb 1.9 TDI IP 115 hp?

The Stage 1 gain for the Skoda Superb 1.9 TDI IP 115 hp is 31 hp (+27%) over the stock 115 hp, for a total of 146 hp. Torque rises from 285 to 350 Nm (+65 Nm).

What is Stage 1 chip tuning for the Skoda Superb?

Stage 1 chip tuning of the Skoda Superb is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +31 hp with no hardware changes.

Can you do Stage 1 on the Skoda Superb 1.9 TDI IP 115 hp?

Yes, Stage 1 for the Skoda Superb 1.9 TDI IP 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.

How much does Stage 2 add on the Skoda Superb?

Stage 2 on the Skoda Superb 1.9 TDI IP 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Which ECUs are found on the Skoda Superb 1.9 TDI IP 115 hp?

The Skoda Superb 1.9 TDI IP 115 hp was fitted with different ECUs depending on the year and trim: Bosch EDC15P+, Bosch EDC16U31. The write method (OBD, Bench, Boot) is determined when the unit is read.

What happens to the Skoda Superb warranty after chip tuning?

The factory warranty of the Skoda Superb does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.

How long does remapping the Skoda Superb take?

On the Skoda Superb 1.9 TDI IP 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.

Is the original file kept when chip tuning the Skoda Superb?

Yes, the original ECU firmware of the Skoda Superb 1.9 TDI IP 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.

What is the price of a Stage 1 remap for the Skoda Superb?

Stage 1 for the Skoda Superb 1.9 TDI IP 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno