Skoda Superb 1.9 TDI IP 105 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Skoda Superb 1.9 TDI IP 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Skoda Superb 1.9 TDI IP 105 hp ECU
Skoda Superb (2003) 1.9 TDI IP 105 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Чехия, 1895). Stage 1 chip tuning raises power from 105 to 140 hp (+35 hp, +33%) and torque from 250 to 320 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC16U1, Bosch EDC16U34. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2003 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Skoda range covers compacts, saloons, SUVs and family estates. Skoda has historically shared platforms and engines with Volkswagen. Skoda is a high-volume VAG brand focused on practicality and affordable pricing. TDI is Skoda's turbo-diesel designation, shared with Volkswagen and Audi.
The Skoda community benefits from a large pool of Stage files drawn from the shared VAG catalogue. On mid-range Skoda diesels, Stage 1 delivers a noticeable torque gain. On Skoda, Stage 1 usually fits within the standard turnaround time. Mid-range Skoda engines form the backbone of the range; Stage 1 preserves engine life. The MQB platform is the most refined chip tuning segment in Europe. The Skoda community in Eastern Europe offers a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Skoda Superb 1.9 TDI IP 105 hp?
After Stage 1 the power of the Skoda Superb 1.9 TDI IP 105 hp rises from 105 to 140 hp, a gain of 35 hp (+33%). Torque rises from 250 to 320 Nm (+70 Nm).
How does Stage 1 differ from stock on the Skoda Superb?
Stage 1 is a software optimization of the factory ECU firmware of the Skoda Superb with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Skoda Superb 1.9 TDI IP 105 hp?
A remap of the Skoda Superb 1.9 TDI IP 105 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Skoda Superb 1.9 TDI IP 105 hp?
Stage 2 on the Skoda Superb 1.9 TDI IP 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Skoda Superb 1.9 TDI IP 105 hp built with?
The Skoda Superb 1.9 TDI IP 105 hp comes with 2 ECU variants: Bosch EDC16U1, Bosch EDC16U34. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Skoda Superb remain valid after Stage 1?
After remapping the Skoda Superb, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Skoda Superb?
Reading and writing via OBD takes 25-30 minutes on the Skoda Superb. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Skoda Superb?
Before Stage 1 the original of the Skoda Superb 1.9 TDI IP 105 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Skoda Superb 1.9 TDI IP 105 hp cost?
The remap price for the Skoda Superb 1.9 TDI IP 105 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.