Renault Megane 1.5 DCI EU6 (Renault) 90 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Renault Megane 1.5 DCI EU6 (Renault) 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.5 DCI EU6 (Renault) 90 hp ECU
Renault Megane (2016) 1.5 DCI EU6 (Renault) 90 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 90 to 125 hp (+35 hp, +39%) and torque from 220 to 300 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Dacia is Renault's mass-market budget sub-brand, built in Romania. Mid-generation diesel models use standard OBD read/write.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. Low-output Renault engines are city-segment units; Stage 1 is safe. On naturally aspirated Renault engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Megane 1.5 DCI EU6 (Renault) 90 hp?
After Stage 1 the power of the Renault Megane 1.5 DCI EU6 (Renault) 90 hp rises from 90 to 125 hp, a gain of 35 hp (+39%). Torque rises from 220 to 300 Nm (+80 Nm).
How does Stage 1 differ from stock on the Renault Megane?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Megane with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Megane?
Stage 1 on the base Renault Megane is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Renault Megane 1.5 DCI EU6 (Renault) 90 hp?
Stage 2 on the Renault Megane 1.5 DCI EU6 (Renault) 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Renault Megane 1.5 DCI EU6 (Renault) 90 hp built with?
The Renault Megane 1.5 DCI EU6 (Renault) 90 hp comes with 3 ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Megane remain valid after Stage 1?
After remapping the Renault Megane, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Megane?
Reading and writing via OBD takes 25-30 minutes on the Renault Megane. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Megane?
Before Stage 1 the original of the Renault Megane 1.5 DCI EU6 (Renault) 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Megane 1.5 DCI EU6 (Renault) 90 hp cost?
The remap price for the Renault Megane 1.5 DCI EU6 (Renault) 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.