Renault Megane 1.5 DCI EU6 110 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Renault Megane 1.5 DCI EU6 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Megane 1.5 DCI EU6 110 hp ECU
Renault Megane (2016) 1.5 DCI EU6 110 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 260 to 300 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID309, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 7 configurations · 4 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. On older-generation Renault models, Stage 1 is done via OBD without bench. Mid-range Renault engines are a mainstream chip tuning subject in France. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines.
Frequently asked questions
What is the Stage 1 effect on the Renault Megane 1.5 DCI EU6 110 hp?
After Stage 1 the power of the Renault Megane 1.5 DCI EU6 110 hp rises from 110 to 135 hp, a gain of 25 hp (+23%). Torque rises from 260 to 300 Nm (+40 Nm).
How does Stage 1 differ from stock on the Renault Megane?
Stage 1 chip tuning of the Renault Megane is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Renault Megane 1.5 DCI EU6 110 hp?
Yes, Stage 1 for the Renault Megane 1.5 DCI EU6 110 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Renault Megane?
Stage 2 on the Renault Megane 1.5 DCI EU6 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Renault Megane 1.5 DCI EU6 110 hp?
The Renault Megane 1.5 DCI EU6 110 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID309, Siemens/Continental SID310. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Renault Megane warranty after chip tuning?
The factory warranty of the Renault Megane does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Renault Megane take?
On the Renault Megane 1.5 DCI EU6 110 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Renault Megane?
Yes, the original ECU firmware of the Renault Megane 1.5 DCI EU6 110 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Renault Megane?
Stage 1 for the Renault Megane 1.5 DCI EU6 110 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.