Renault Kangoo 1.5 DCI EU6 90 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Kangoo 1.5 DCI EU6 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kangoo 1.5 DCI EU6 90 hp ECU
Renault Kangoo (2013 - II (II)) 1.5 DCI EU6 90 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 220 to 250 Nm (+30 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
Renault is a French carmaker, founded in 1899. Renault diesel engines are also used in Nissan, Dacia and Mercedes (the Citan/Vito run Renault engines).
Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Renault Kangoo 1.5 DCI EU6 90 hp increase after Stage 1?
Stage 1 for the Renault Kangoo 1.5 DCI EU6 90 hp adds +20 hp — power increases from 90 to 110 hp (+22%). Torque rises from 220 to 250 Nm (+30 Nm).
What does a Stage 1 remap of the Renault Kangoo 1.5 DCI EU6 90 hp include?
Stage 1 on the Renault Kangoo 1.5 DCI EU6 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is Stage 1 safe for the low-output Renault Kangoo 1.5 DCI EU6 90 hp?
Yes, Stage 1 on the low-output Renault Kangoo 1.5 DCI EU6 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Renault Kangoo 1.5 DCI EU6 90 hp?
Stage 2 for the Renault Kangoo 1.5 DCI EU6 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Renault Kangoo 1.5 DCI EU6 90 hp have?
The Renault Kangoo 1.5 DCI EU6 90 hp has 3 ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Renault Kangoo?
Stage 1 on the Renault Kangoo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Kangoo 1.5 DCI EU6 90 hp done?
The full remap cycle for the Renault Kangoo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Kangoo?
The original Renault Kangoo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Kangoo 1.5 DCI EU6 90 hp?
The cost of Stage 1 for the Renault Kangoo 1.5 DCI EU6 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.